Enerzone Solution 1.8-I Wood Insert

$2,299.00

APPLIANCE PERFORMANCE (1)

Fuel type : Dry cordwood
Recommended heating area (sq.ft.) : () 500 – 1,800
Firebox volume (cu. ft.) : 1.8
Maximum burn time : () 6 h
Maximum heat output (dry cordwood) : (2) 65,000 BTU/h (19.0 kW)
Overall heat output rate (min. to max.) : (2) (3) 10,800 BTU/h (3.2 kW) to 34,000 BTU/h (10.0 kW)
Average overall efficiency (EPA cribs / Douglas fir) :(3) 64.0 % (HHV) (4) 68.0 % (LHV) (5)
Average overall efficiency (dry cordwood) : (3) N.A. (HHV) (4) N.A. (LHV) (5)
Optimum efficiency : (6) (7) 75 %
Average particulate emissions rate : (8) 4.3 g/h
Average CO : (9) N.A.

GENERAL FEATURES

Maximum log length 21″
Log positioning Over width
Chimney diameter 6″
Minimum chimney height (feet) 15'
Baffle type C-Cast
Approved for a mobile home installation No
Weight 352 lb (160 kg)
Door type Single, glass with cast iron frame
Glass type Ceramic glass
Glass surface – dimensions (Width X Height) 16 1/4″ X 8 3/4″
Overall dimension (Height) 21″
Overall dimension (Width) 28 3/8″
Overall dimension (Depth) 23 5/8″
Door opening – dimension (Height) 7 3/4″
Door opening – dimension (Width) 17 1/2″
Firebox – dimension (Height) 11 1/8″
Firebox – dimension (Width) 21″
Firebox – dimension (Depth) 13 3/4″
Steel thickness – body 3/16″
Steel thickness – top 1/4″
Centre line of flue outlet to the side 13 1/2″
Centre line of flue outlet to the back 6 7/8″
Projection in the room (minimum / maximum)
Fireplace opening – minimum (Height) 21 3/8″
Fireplace opening – minimum (Width) 28 7/8″
Fireplace opening – minimum (Depth) 12 3/4″
USA standard (emissions) EPA Method 28
Canadian Standard (emissions) CSA B415.1-10
USA standard (safety) UL 1482
Canadian standard (safety) ULC S628
Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
Warranty Limited lifetime
Minimum clearances to combustibles *
(Data expressed in inches. 1 inch = 25.4 mm)
Canada USA
Clearance – top (measured from the platform on which the appliance is installed) 84″ 84″
Clearance – minimum floor protection in front of the appliance 18″ 16″

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

** Measured from the platform on which the product is installed. Some appliances have been tested with a low ceiling. If necessary, consult the owner's manual for information on these clearances to combustible materials.

Out of stock

Categories: ,

Description

The Solution 1.8-I insert, as its name suggests, was developed from the same liner as Solution 1.8. The superior quality combustion and several other features are identical to its free-standing namesake.

Solution 1.8-I comes standard with a powerful, heat-activated 144 CFM fan strategically positioned to redistribute the heat from the firebox into the room.

It is designed to fit a face plate that can cover a masonry hearth up to 32 inches (81 cm) high and 50 inches (127 cm) wide. The door overlay can be matched to the face plate trims, which are available in black and brushed nickel plated.

Manual

To view the user manual for this product, click the link below.

View